Every planning control identified for any lot | Every planning rule & overlay cross-referenced in one query | Approval likelihood scored for every control | Conflicts and overrides resolved automatically | Every answer cited to the source clause | Ask planning questions in plain English | Results in under 1 second | Every planning control identified for any lot | Every planning rule & overlay cross-referenced in one query | Approval likelihood scored for every control | Conflicts and overrides resolved automatically | Every answer cited to the source clause | Ask planning questions in plain English | Results in under 1 second |
Suburb planning guide · Updated 2026-04-27

Bankstown, NSW 2200 Zoning, development potential & planning controls

Low Density Residential dominant. Median sale $600K over the last 24 months. 84% of decided DAs approved.

Dominant zone
R2
Low Density Residential
Median sale (24m)
$600K
1,156 sales
DA approval rate
84%
321 of 382 approved
Total lots
5,553
Marketplace

Need a builder, surveyor or planner near Bankstown? See local experts ↓

Zoning

What you can build in Bankstown

Bankstown is dominated by R2Low Density Residential. Land use rules, height, FSR, and permitted developments are set per zone in the Local Environmental Plan and refined by the Development Control Plan.

R2
Dominant
R2 Low Density Residential 61.3%
R4 High Density Residential 22.1%
MU1 Mixed Use 6.6%
E4 General Industrial 6.4%
E2 Commercial Centre 3.5%
Avg max height
14.1 m

Limit varies by lot — check your address for the exact figure.

Avg max FSR
1.05:1

Floor Space Ratio — total floor area as a multiple of lot area.

Use mix
Residential78%
Commercial10%

Location

Where Bankstown sits

Bankstown 2200 covers an undefined area within Canterbury-Bankstown Council.

Overlays © NSW Government
Council
Canterbury-Bankstown Council
Postcode
2200
Area
Total lots
5,553

Drill into any lot in Bankstown

Open the interactive map — click any address to see its zone, height, FSR, overlays, and approval likelihood.

Open interactive map

Development potential

Where the upside is in Bankstown

We score every lot for development signal — under-built relative to the controls, eligible for a granny flat, or sized for subdivision.

Underdeveloped
3,072

lots with remaining GFA capacity

granny flat eligible
4,089

under SEPP (Housing) 2021

Subdivision potential
2,134

lots that may support subdivision

Site assembly
189

adjoining lots with combined upside

Total dev potential
5,198 lots

show at least one development signal

Transport Oriented Dev
1,117 lots

within a TOD corridor (uplift expected)

Rezoning signal score
43.1 /100

average uplift signal across the suburb · 655 high-signal lots

Theoretical capacity if every lot built to its limit: 75,428 dwellings, with 5,403,811 m² of unused GFA across the suburb.

Own a property in Bankstown?

Check your lot's exact development potential — height, FSR, granny flat, subdivision, dual-occ.

Run a report on your address

Constraints & risks

What could stop you in Bankstown

1% of lots carry heritage controls; also: 0.1% of lots are exposed to projected sea-level rise.

Suburb-wide percentages — your specific lot may have all, some, or none of these.

Flood-affected None

Mapped flood-prone land

Bushfire-prone None

RFS bushfire-prone land mapping

Heritage controls 0.9%

Heritage item or Conservation Area

Near contaminated land None

Within 100 m of EPA-listed site

Threatened ecology (TEC) None

Mapped TEC vegetation

Sea-level rise exposure 0.1%

Coastal hazard mapping

Flight noise contour None

ANEF / aircraft noise

04Plumbing

Plumber · serves Bankstown, NSW

12A Restwell St, Bankstown NSW 2200

View profile

Market

Bankstown property market

Sales, rent, and yield data drawn from NSW Property Sales Information and rental bond data over the past 24 months.

Median sale price (24m)
$600,000
1,156 sales · land value $1.13M
Median rent (house)
$650 / wk
Houses
Gross rental yield
5.3%
House, gross of costs

DA activity

Development applications in Bankstown

382 development applications for Bankstown addresses were decided by Canterbury-Bankstown Council over the past 24 months. 321 approved — a 84% approval rate. Average processing time: 33 days.

84%
Approved
DAs lodged (24m)
382
Approved
321
New dwelling DAs
362
Building approvals (12m)
84

Demographics & lifestyle

Who lives in Bankstown

ABS Census 2021 population data combined with lot-level amenity, healthcare, lifestyle, and crime indices.

Green cover
29%
Amenity score
99.6 /100

Walkable amenity within 1 km

Healthcare access
99.4 /100

GP / hospital / pharmacy proximity

Lifestyle score
99.6 /100

Cafés, parks, schools, transport

FAQs

Common questions about Bankstown

What's the zoning in Bankstown 2200?

Bankstown is dominated by the R2 (Low Density Residential) zone, which covers 3,107 of 5,553 lots (61%). The full mix is: R2 Low Density Residential (61%), R4 High Density Residential (22%), MU1 Mixed Use (7%), E4 General Industrial (6%), E2 Commercial Centre (4%).

What's the height limit and FSR in Bankstown?

Across Bankstown, the average maximum building height is 14.1 m and the average maximum Floor Space Ratio (FSR) is 1.05:1. Individual lots can vary materially — height and FSR are set per zone in the Local Environmental Plan (LEP) and can be modified by overlays. For an exact figure on a specific address, generate a planning report.

Can I build a granny flat in Bankstown?

Yes — 4,089 lots in Bankstown appear eligible for a granny flat under SEPP (Housing) 2021, based on lot size, zoning, and frontage. Eligibility is lot-specific: get a planning report on your address to confirm.

What's the median property price in Bankstown?

The median sale price in Bankstown over the past 24 months is $600,000, across 1,156 sales. Median unimproved land value is $1,130,000.

What's the median rent in Bankstown?

Median weekly rent for a house in Bankstown is $650. Gross rental yield works out to 5.3%.

What's the development application approval rate in Canterbury-Bankstown Council?

Canterbury-Bankstown Council decided 382 development applications for Bankstown addresses over the past 24 months, with 321 approved (84% approval rate). Average processing time is 33 days. Processing time depends heavily on application complexity, council backlog, and whether the application requires referral to other agencies.

What planning constraints apply in Bankstown?

Across Bankstown, 1% with heritage controls. These are suburb-wide percentages — every lot has its own combination. A planning report on a specific address shows exactly which controls apply.

What's the development potential of Bankstown?

5,198 of 5,553 lots in Bankstown show identifiable development potential — under-developed for the planning controls, eligible for a granny flat, or capable of subdivision. 1,117 lots fall within a Transport Oriented Development corridor. Average rezoning signal score: 43.1 / 100.

A Safeway Group

Painter · serves Bankstown, NSW

92 South Terrace, Bankstown NSW 2200

View profile

Get a planning report for any address in Bankstown

Suburb-wide stats are useful for context. For a buy-or-walk decision on a specific lot, you need every control, every constraint, and every clause cited to source.

Run a report — from A$29

14-section report · LEP + SEPP + DCP cross-referenced · cited to source

Methodology & sources

Zoning, height, FSR, and overlays parsed from the Canterbury-Bankstown Council Local Environmental Plan, applicable State Environmental Planning Policies, and the Development Control Plan. Property sales drawn from NSW Property Sales Information. DA history aggregated from the NSW Planning Portal. Heritage, flood, bushfire, contaminated land, TEC, sea-level rise, and aircraft noise overlays from the NSW Spatial Services and EPA registers. Population, age, income, and tenure from ABS Census 2021. Aggregated by ZoneDSS · last updated 2026-04-27.

Suburb-wide statistics — your specific lot may vary. Always run a planning report on the actual address before making a decision. How ZoneDSS works →