Every planning control identified for any lot | Every planning rule & overlay cross-referenced in one query | Approval likelihood scored for every control | Conflicts and overrides resolved automatically | Every answer cited to the source clause | Ask planning questions in plain English | Results in under 1 second | Every planning control identified for any lot | Every planning rule & overlay cross-referenced in one query | Approval likelihood scored for every control | Conflicts and overrides resolved automatically | Every answer cited to the source clause | Ask planning questions in plain English | Results in under 1 second |
Suburb planning guide · Updated 2026-04-27

Berowra Heights, NSW 2082 Zoning, development potential & planning controls

Low Density Residential dominant. Median sale $1.52M over the last 24 months. 88% of decided DAs approved.

Dominant zone
R2
Low Density Residential
Median sale (24m)
$1.52M
130 sales
DA approval rate
88%
75 of 85 approved
Total lots
1,855
Marketplace

Need a builder, surveyor or planner near Berowra Heights? See local experts ↓

Zoning

What you can build in Berowra Heights

Berowra Heights is dominated by R2Low Density Residential. Land use rules, height, FSR, and permitted developments are set per zone in the Local Environmental Plan and refined by the Development Control Plan.

R2
Dominant
R2 Low Density Residential 97.7%
RE1 Public Recreation 1.1%
C3 Commercial Core 0.5%
R3 Medium Density Residential 0.4%
E1 Local Centre 0.3%
Avg max height
8.0 m

Limit varies by lot — check your address for the exact figure.

Avg max FSR
1.00:1

Floor Space Ratio — total floor area as a multiple of lot area.

Use mix
Residential98%
Commercial0%
Environment1%

Location

Where Berowra Heights sits

Berowra Heights 2082 covers an undefined area within The Council of the Shire of Hornsby.

Overlays © NSW Government
Council
The Council of the Shire of Hornsby
Postcode
2082
Area
Total lots
1,855

Drill into any lot in Berowra Heights

Open the interactive map — click any address to see its zone, height, FSR, overlays, and approval likelihood.

Open interactive map

Development potential

Where the upside is in Berowra Heights

We score every lot for development signal — under-built relative to the controls, eligible for a granny flat, or sized for subdivision.

Underdeveloped
3

lots with remaining GFA capacity

granny flat eligible
1,816

under SEPP (Housing) 2021

Subdivision potential
1,331

lots that may support subdivision

Total dev potential
6 lots

show at least one development signal

Rezoning signal score
24.0 /100

average uplift signal across the suburb

Theoretical capacity if every lot built to its limit: 375 dwellings, with 15,534 m² of unused GFA across the suburb.

Own a property in Berowra Heights?

Check your lot's exact development potential — height, FSR, granny flat, subdivision, dual-occ.

Run a report on your address

Constraints & risks

What could stop you in Berowra Heights

58% of lots are bushfire-prone — a bushfire assessment is likely required; also: 0% of lots carry heritage controls; 3.2% of lots intersect a Threatened Ecological Community.

Suburb-wide percentages — your specific lot may have all, some, or none of these.

Flood-affected None

Mapped flood-prone land

Bushfire-prone 57.8%

RFS bushfire-prone land mapping

Heritage controls 0.1%

Heritage item or Conservation Area

Near contaminated land None

Within 100 m of EPA-listed site

Threatened ecology (TEC) 3.2%

Mapped TEC vegetation

Sea-level rise exposure None

Coastal hazard mapping

Flight noise contour None

ANEF / aircraft noise

ASTLEY ELECTRICAL

Electrician · serves Berowra Heights, NSW

148 Woodcourt Rd, Berowra Heights NSW 2082

View profile

Market

Berowra Heights property market

Sales, rent, and yield data drawn from NSW Property Sales Information and rental bond data over the past 24 months.

Median sale price (24m)
$1,515,000
130 sales · land value $960K
Median rent (house)
$775 / wk
Houses
Gross rental yield
2.4%
House, gross of costs

DA activity

Development applications in Berowra Heights

85 development applications for Berowra Heights addresses were decided by The Council of the Shire of Hornsby over the past 24 months. 75 approved — a 88% approval rate.

88%
Approved
DAs lodged (24m)
85
Approved
75
New dwelling DAs
91
Building approvals (12m)
14

Demographics & lifestyle

Who lives in Berowra Heights

ABS Census 2021 population data combined with lot-level amenity, healthcare, lifestyle, and crime indices.

Green cover
48%
Amenity score
82.3 /100

Walkable amenity within 1 km

Healthcare access
78.4 /100

GP / hospital / pharmacy proximity

Lifestyle score
83.6 /100

Cafés, parks, schools, transport

FAQs

Common questions about Berowra Heights

What's the zoning in Berowra Heights 2082?

Berowra Heights is dominated by the R2 (Low Density Residential) zone, which covers 1,811 of 1,855 lots (98%). The full mix is: R2 Low Density Residential (98%), RE1 Public Recreation (1%), C3 Commercial Core (1%), R3 Medium Density Residential (0%), E1 Local Centre (0%).

What's the height limit and FSR in Berowra Heights?

Across Berowra Heights, the average maximum building height is 8.0 m and the average maximum Floor Space Ratio (FSR) is 1.00:1. Individual lots can vary materially — height and FSR are set per zone in the Local Environmental Plan (LEP) and can be modified by overlays. For an exact figure on a specific address, generate a planning report.

Can I build a granny flat in Berowra Heights?

Yes — 1,816 lots in Berowra Heights appear eligible for a granny flat under SEPP (Housing) 2021, based on lot size, zoning, and frontage. Eligibility is lot-specific: get a planning report on your address to confirm.

What's the median property price in Berowra Heights?

The median sale price in Berowra Heights over the past 24 months is $1,515,000, across 130 sales. Median unimproved land value is $960,000.

What's the median rent in Berowra Heights?

Median weekly rent for a house in Berowra Heights is $775. Gross rental yield works out to 2.4%.

What's the development application approval rate in The Council of the Shire of Hornsby?

The Council of the Shire of Hornsby decided 85 development applications for Berowra Heights addresses over the past 24 months, with 75 approved (88% approval rate). Processing time depends heavily on application complexity, council backlog, and whether the application requires referral to other agencies.

What planning constraints apply in Berowra Heights?

Across Berowra Heights, 0% with heritage controls, 57.8% bushfire-prone. These are suburb-wide percentages — every lot has its own combination. A planning report on a specific address shows exactly which controls apply.

What's the development potential of Berowra Heights?

6 of 1,855 lots in Berowra Heights show identifiable development potential — under-developed for the planning controls, eligible for a granny flat, or capable of subdivision. Average rezoning signal score: 24.0 / 100.

Franklin Carports & Awnings

Roofing contractor · serves Berowra Heights, NSW

8 Catriona Cl, Berowra Heights NSW 2082

View profile

Get a planning report for any address in Berowra Heights

Suburb-wide stats are useful for context. For a buy-or-walk decision on a specific lot, you need every control, every constraint, and every clause cited to source.

Run a report — from A$29

14-section report · LEP + SEPP + DCP cross-referenced · cited to source

Methodology & sources

Zoning, height, FSR, and overlays parsed from the The Council of the Shire of Hornsby Local Environmental Plan, applicable State Environmental Planning Policies, and the Development Control Plan. Property sales drawn from NSW Property Sales Information. DA history aggregated from the NSW Planning Portal. Heritage, flood, bushfire, contaminated land, TEC, sea-level rise, and aircraft noise overlays from the NSW Spatial Services and EPA registers. Population, age, income, and tenure from ABS Census 2021. Aggregated by ZoneDSS · last updated 2026-04-27.

Suburb-wide statistics — your specific lot may vary. Always run a planning report on the actual address before making a decision. How ZoneDSS works →