Every planning control identified for any lot | Every planning rule & overlay cross-referenced in one query | Approval likelihood scored for every control | Conflicts and overrides resolved automatically | Every answer cited to the source clause | Ask planning questions in plain English | Results in under 1 second | Every planning control identified for any lot | Every planning rule & overlay cross-referenced in one query | Approval likelihood scored for every control | Conflicts and overrides resolved automatically | Every answer cited to the source clause | Ask planning questions in plain English | Results in under 1 second |
Suburb planning guide · Updated 2026-06-08

Millbank, QLD 4670 Zoning, development potential & planning controls

Low density residential dominant. 1,495 lots resolved to zone, overlays and development potential.

Dominant zone
LDR
Low density residential
Median rent (house)
$611
per week
Population
7,393
ABS Census 2021
Total lots
1,495
2.7 km²

Zoning

What you can build in Millbank

Millbank is dominated by LDRLow density residential. Land use, building height, and permitted development are set per zone in the council planning scheme, made under the Queensland Planning Act 2016.

LDR
Dominant
LDR Low density residential 93.1%
RU Rural 3.4%
SC Specialised centre 1.6%
CF Community facilities 1.3%
OS Open space 0.5%
SR Sport and recreation 0.2%
LD Limited development (constrained land) 0.1%
Avg max height
m

Limit varies by lot — check your address for the exact figure.

Theoretical dwellings

Modelled dwelling capacity if every lot built to its zone controls.

Use mix
Residential93%
Environment1%

Location

Where Millbank sits

Millbank 4670 covers 2.7 km² within Bundaberg Regional.

Overlays © NSW Government
Council
Bundaberg Regional
Postcode
4670
Area
2.70 km²
Total lots
1,495

Drill into any lot in Millbank

Open the interactive map — click any address to see its zone, height, FSR, overlays, and approval likelihood.

Open interactive map

Development potential

Where the upside is in Millbank

We score every lot for development signal — under-built relative to the controls, eligible for a secondary dwelling, or sized for subdivision.

secondary dwelling eligible
969

under the relevant council planning scheme

Subdivision potential
0

lots that may support subdivision

Total dev potential
969 lots

show at least one development signal

Own a property in Millbank?

Check your lot's exact development potential — height, FSR, granny flat, subdivision, dual-occ.

Run a report on your address

Constraints & risks

What could stop you in Millbank

9% of lots are in mapped flood zones — material for any development; also: 8.8% of lots: state environmental significance.

Suburb-wide percentages — your specific lot may have all, some, or none of these.

Flood-affected 8.8%

Flood hazard overlay mapping

Bushfire-prone None

Bushfire hazard overlay mapping

State environmental significance 8.8%

Matters of State Environmental Significance (MSES) overlay

Market

Millbank property market

Rent and market context from state rental bond and demographic data.

Median rent (house)
$611 / wk
Houses

Sale-price history isn't yet loaded for Queensland suburbs — rent, demographics and planning data are shown where available.

Projected dwellings 2036
7,903

Queensland Government Statistician's Office projection.

Demographics & lifestyle

Who lives in Millbank

ABS Census 2021 population data combined with lot-level amenity, healthcare, lifestyle, and crime indices.

Population
7,393
Median age
48
Household income
$57.79K
Owner-occupied
73%
Renting
27%
Amenity score
100.0 /100

Walkable amenity within 1 km

Lifestyle score
67.0 /100

Cafés, parks, schools, transport

FAQs

Common questions about Millbank

What's the zoning in Millbank 4670?

Millbank is dominated by the LDR (Low density residential) zone, which covers 1,189 of 1,495 lots (93%). The full mix is: LDR Low density residential (93%), RU Rural (3%), SC Specialised centre (2%), CF Community facilities (1%), OS Open space (1%), SR Sport and recreation (0%), LD Limited development (constrained land) (0%).

Can I build a secondary dwelling in Millbank?

Yes — 969 lots in Millbank appear eligible for a secondary dwelling under the relevant council planning scheme, based on lot size, zoning, and frontage. Eligibility is lot-specific: get a planning report on your address to confirm.

What's the median rent in Millbank?

Median weekly rent for a house in Millbank is $611.

What planning constraints apply in Millbank?

Across Millbank, 8.8% flood-affected, 8.8% state environmental significance. These are suburb-wide percentages — every lot has its own combination. A planning report on a specific address shows exactly which controls apply.

What's the development potential of Millbank?

969 of 1,495 lots in Millbank show identifiable development potential — under-developed for the planning controls, eligible for a secondary dwelling, or capable of subdivision.

Get a planning report for any address in Millbank

Suburb-wide stats are useful for context. For a buy-or-walk decision on a specific lot, you need every control, every constraint, and every clause cited to source.

Run a report — from A$29

14-section report · planning scheme controls cross-referenced · cited to source

Methodology & sources

Zoning, height, overlays and development potential computed from the Bundaberg Regionalcouncil planning scheme and lot-level cadastre (1,495 lots). Hazard overlays, demographics and rent drawn from Queensland council planning schemes, Development.i / council DA registers, Queensland Globe, and ABS Census 2021. Aggregated by ZoneDSS · last updated 2026-06-08.

Suburb-wide statistics — your specific lot may vary. Always run a planning report on the actual address before making a decision. How ZoneDSS works →