Capital City Zone dominant. 76,604 lots resolved to zone, overlays and development potential.
Melbourne 3000 spans 2 councils: Melbourne (64,502 lots), Port Phillip (12,102 lots). The dominant council (Melbourne) sets the canonical URL for this page.
Zoning
Melbourne is dominated by CCZ — Capital City Zone. Land use, building height, overlays, and permitted development are set per zone in the planning scheme under the Victorian Planning Provisions, with ResCode governing residential design.
Limit varies by lot — check your address for the exact figure.
Modelled dwelling capacity if every lot built to its zone controls.
Location
Melbourne 3000 covers 6.5 km² within Melbourne.
Drill into any lot in Melbourne
Open the interactive map — click any address to see its zone, height, FSR, overlays, and approval likelihood.
Development potential
We score every lot for development signal — under-built relative to the controls, eligible for a small second dwelling, or sized for subdivision.
under the VPP small second dwelling provisions (Clause 52.18 / 54)
lots that may support subdivision
show at least one development signal
within a TOD corridor (uplift expected)
average uplift signal across the suburb
Own a property in Melbourne?
Check your lot's exact development potential — height, FSR, granny flat, subdivision, dual-occ.
Constraints & risks
11% of lots are in mapped flood zones — material for any development; also: 21% of lots carry a Heritage Overlay.
Suburb-wide percentages — your specific lot may have all, some, or none of these.
LSIO / Floodway overlay
BMO — BAL assessment triggered
HO — controls on demolition & works
Near a recorded contaminated site
Market
Rent and market context from state rental bond and demographic data.
Sale-price history isn't yet loaded for this suburb — rent and planning data are shown where available.
Demographics & lifestyle
ABS Census 2021 population data combined with lot-level amenity, healthcare, lifestyle, and crime indices.
Walkable amenity within 1 km
GP / hospital / pharmacy proximity
Cafés, parks, schools, transport
FAQs
Melbourne is dominated by the CCZ (Capital City Zone) zone, which covers 59,592 of 76,604 lots (78%). The full mix is: CCZ Capital City Zone (78%), C1Z Commercial 1 Zone (16%), RGZ Residential Growth Zone (3%), MUZ Mixed Use Zone (3%), PPRZ Public Park and Recreation Zone (0%), PUZ Public Use Zone (0%), TRZ Transport Zone (0%), SUZ Special Use Zone (0%), GRZ General Residential Zone (0%).
Across Melbourne, the average maximum building height is 9.0 m. Height is set per zone in the planning scheme (Victorian Planning Provisions) and can be varied by overlays and schedules. For the exact control on a specific address, generate a planning report.
Yes — 4,646 lots in Melbourne appear eligible for a small second dwelling under the VPP small second dwelling provisions (Clause 52.18 / 54), based on lot size, zoning, and frontage. Eligibility is lot-specific: get a planning report on your address to confirm.
Median weekly rent for a house in Melbourne is $900.
Across Melbourne, 10.5% flood-affected, 21% with heritage controls, 18.9% near contaminated sites. These are suburb-wide percentages — every lot has its own combination. A planning report on a specific address shows exactly which controls apply.
16,705 of 76,604 lots in Melbourne show identifiable development potential — under-developed for the planning controls, eligible for a small second dwelling, or capable of subdivision. 69,002 lots fall within a Transport Oriented Development corridor. Average rezoning signal score: 61.0 / 100.
Continue exploring
Compare zoning, development potential, and DA activity across other suburbs in Melbourne and nearby postcodes.
Suburb-wide stats are useful for context. For a buy-or-walk decision on a specific lot, you need every control, every constraint, and every clause cited to source.
Run a report — from A$2914-section report · planning scheme + overlays cross-referenced · cited to source
Verify with official sources
Don't take our word for it. Every figure on this page is computed from authoritative Victoria Government data — and you can verify any of it directly with the source.
Official Victoria source — verify zoning, overlays, planning controls and the figures shown on this page.
Official Victoria source — verify zoning, overlays, planning controls and the figures shown on this page.
Official Victoria source — verify zoning, overlays, planning controls and the figures shown on this page.
Official Victoria source — verify zoning, overlays, planning controls and the figures shown on this page.
Zoning, height, overlays and development potential computed from the Melbourneplanning scheme (Victorian Planning Provisions) and lot-level cadastre (76,604 lots). Hazard overlays, demographics and rent drawn from Victorian Planning Provisions & planning schemes, Victorian Building Authority / building permit activity, Victoria in Future, and ABS Census 2021. Aggregated by ZoneDSS · last updated 2026-06-08.
Suburb-wide statistics — your specific lot may vary. Always run a planning report on the actual address before making a decision. How ZoneDSS works →