Every planning control identified for any lot | Every planning rule & overlay cross-referenced in one query | Approval likelihood scored for every control | Conflicts and overrides resolved automatically | Every answer cited to the source clause | Ask planning questions in plain English | Results in under 1 second | Every planning control identified for any lot | Every planning rule & overlay cross-referenced in one query | Approval likelihood scored for every control | Conflicts and overrides resolved automatically | Every answer cited to the source clause | Ask planning questions in plain English | Results in under 1 second |
Suburb planning guide · Updated 2026-06-08

Bellbrae, VIC 3228 Zoning, development potential & planning controls

Farming Zone dominant. 555 lots resolved to zone, overlays and development potential.

Dominant zone
FZ
Farming Zone
Median rent (house)
$600
per week
small second dwelling eligible
197
lots
Total lots
555
50.8 km²

Zoning

What you can build in Bellbrae

Bellbrae is dominated by FZFarming Zone. Land use, building height, overlays, and permitted development are set per zone in the planning scheme under the Victorian Planning Provisions, with ResCode governing residential design.

FZ
Dominant
FZ Farming Zone 37.7%
LDRZ Low Density Residential Zone 26.1%
RCZ Rural Conservation Zone 15.3%
TZ Township Zone 10.6%
TRZ Transport Zone 7.4%
PCRZ Public Conservation and Resource Zone 2.0%
PPRZ Public Park and Recreation Zone 0.5%
PUZ Public Use Zone 0.4%
Avg max height
7.0 m

Limit varies by lot — check your address for the exact figure.

Theoretical dwellings
2,626

Modelled dwelling capacity if every lot built to its zone controls.

Use mix
Residential41%
Environment3%
Rural38%

Location

Where Bellbrae sits

Bellbrae 3228 covers 50.8 km² within Surf Coast.

Overlays © NSW Government
Council
Surf Coast
Postcode
3228
Area
50.78 km²
Total lots
555

Drill into any lot in Bellbrae

Open the interactive map — click any address to see its zone, height, FSR, overlays, and approval likelihood.

Open interactive map

Development potential

Where the upside is in Bellbrae

We score every lot for development signal — under-built relative to the controls, eligible for a small second dwelling, or sized for subdivision.

small second dwelling eligible
197

under the VPP small second dwelling provisions (Clause 52.18 / 54)

Subdivision potential
128

lots that may support subdivision

Total dev potential
197 lots

show at least one development signal

Rezoning signal score
18.0 /100

average uplift signal across the suburb

Own a property in Bellbrae?

Check your lot's exact development potential — height, FSR, granny flat, subdivision, dual-occ.

Run a report on your address

Constraints & risks

What could stop you in Bellbrae

a small share of lots (0.7%) intersect flood mapping; also: 40% of lots are bushfire-prone — a bushfire assessment is likely required; 0% of lots carry a Heritage Overlay.

Suburb-wide percentages — your specific lot may have all, some, or none of these.

Flood / inundation overlay 0.7%

LSIO / Floodway overlay

Bushfire management overlay 40.0%

BMO — BAL assessment triggered

Heritage Overlay 0.2%

HO — controls on demolition & works

Potentially contaminated None

Near a recorded contaminated site

Market

Bellbrae property market

Rent and market context from state rental bond and demographic data.

Median rent (house)
$600 / wk
Houses

Sale-price history isn't yet loaded for this suburb — rent and planning data are shown where available.

0

FAQs

Common questions about Bellbrae

What's the zoning in Bellbrae 3228?

Bellbrae is dominated by the FZ (Farming Zone) zone, which covers 209 of 555 lots (38%). The full mix is: FZ Farming Zone (38%), LDRZ Low Density Residential Zone (26%), RCZ Rural Conservation Zone (15%), TZ Township Zone (11%), TRZ Transport Zone (7%), PCRZ Public Conservation and Resource Zone (2%), PPRZ Public Park and Recreation Zone (1%), PUZ Public Use Zone (0%).

What's the building height limit in Bellbrae?

Across Bellbrae, the average maximum building height is 7.0 m. Height is set per zone in the planning scheme (Victorian Planning Provisions) and can be varied by overlays and schedules. For the exact control on a specific address, generate a planning report.

Can I build a small second dwelling in Bellbrae?

Yes — 197 lots in Bellbrae appear eligible for a small second dwelling under the VPP small second dwelling provisions (Clause 52.18 / 54), based on lot size, zoning, and frontage. Eligibility is lot-specific: get a planning report on your address to confirm.

What's the median rent in Bellbrae?

Median weekly rent for a house in Bellbrae is $600.

What planning constraints apply in Bellbrae?

Across Bellbrae, 0.7% flood-affected, 0% with heritage controls, 40.0% bushfire-prone. These are suburb-wide percentages — every lot has its own combination. A planning report on a specific address shows exactly which controls apply.

What's the development potential of Bellbrae?

197 of 555 lots in Bellbrae show identifiable development potential — under-developed for the planning controls, eligible for a small second dwelling, or capable of subdivision. Average rezoning signal score: 18.0 / 100.

Get a planning report for any address in Bellbrae

Suburb-wide stats are useful for context. For a buy-or-walk decision on a specific lot, you need every control, every constraint, and every clause cited to source.

Run a report — from A$29

14-section report · planning scheme + overlays cross-referenced · cited to source

Methodology & sources

Zoning, height, overlays and development potential computed from the Surf Coastplanning scheme (Victorian Planning Provisions) and lot-level cadastre (555 lots). Hazard overlays, demographics and rent drawn from Victorian Planning Provisions & planning schemes, Victorian Building Authority / building permit activity, Victoria in Future, and ABS Census 2021. Aggregated by ZoneDSS · last updated 2026-06-08.

Suburb-wide statistics — your specific lot may vary. Always run a planning report on the actual address before making a decision. How ZoneDSS works →