Every planning control identified for any lot | Every planning rule & overlay cross-referenced in one query | Approval likelihood scored for every control | Conflicts and overrides resolved automatically | Every answer cited to the source clause | Ask planning questions in plain English | Results in under 1 second | Every planning control identified for any lot | Every planning rule & overlay cross-referenced in one query | Approval likelihood scored for every control | Conflicts and overrides resolved automatically | Every answer cited to the source clause | Ask planning questions in plain English | Results in under 1 second |
Suburb planning guide · Updated 2026-06-08

Seaton, VIC 3858 Zoning, development potential & planning controls

Rural Living Zone dominant. 313 lots resolved to zone, overlays and development potential.

Dominant zone
RLZ
Rural Living Zone
Median rent (house)
$450
per week
small second dwelling eligible
0
lots
Total lots
313
47.9 km²

Zoning

What you can build in Seaton

Seaton is dominated by RLZRural Living Zone. Land use, building height, overlays, and permitted development are set per zone in the planning scheme under the Victorian Planning Provisions, with ResCode governing residential design.

RLZ
Dominant
RLZ Rural Living Zone 54.0%
FZ Farming Zone 41.9%
PCRZ Public Conservation and Resource Zone 3.8%
PUZ Public Use Zone 0.3%
Avg max height
6.0 m

Limit varies by lot — check your address for the exact figure.

Theoretical dwellings

Modelled dwelling capacity if every lot built to its zone controls.

Use mix
Residential54%
Environment4%
Rural42%

Location

Where Seaton sits

Seaton 3858 covers 47.9 km² within Wellington.

Overlays © NSW Government
Council
Wellington
Postcode
3858
Area
47.90 km²
Total lots
313

Drill into any lot in Seaton

Open the interactive map — click any address to see its zone, height, FSR, overlays, and approval likelihood.

Open interactive map

Development potential

Where the upside is in Seaton

We score every lot for development signal — under-built relative to the controls, eligible for a small second dwelling, or sized for subdivision.

small second dwelling eligible
0

under the VPP small second dwelling provisions (Clause 52.18 / 54)

Subdivision potential
0

lots that may support subdivision

Total dev potential
0 lots

show at least one development signal

Rezoning signal score
11.0 /100

average uplift signal across the suburb

Own a property in Seaton?

Check your lot's exact development potential — height, FSR, granny flat, subdivision, dual-occ.

Run a report on your address

Constraints & risks

What could stop you in Seaton

33% of lots are bushfire-prone — a bushfire assessment is likely required.

Suburb-wide percentages — your specific lot may have all, some, or none of these.

Flood / inundation overlay None

LSIO / Floodway overlay

Bushfire management overlay 32.9%

BMO — BAL assessment triggered

Heritage Overlay None

HO — controls on demolition & works

Potentially contaminated None

Near a recorded contaminated site

Market

Seaton property market

Rent and market context from state rental bond and demographic data.

Median rent (house)
$450 / wk
Houses

Sale-price history isn't yet loaded for this suburb — rent and planning data are shown where available.

0

FAQs

Common questions about Seaton

What's the zoning in Seaton 3858?

Seaton is dominated by the RLZ (Rural Living Zone) zone, which covers 169 of 313 lots (54%). The full mix is: RLZ Rural Living Zone (54%), FZ Farming Zone (42%), PCRZ Public Conservation and Resource Zone (4%), PUZ Public Use Zone (0%).

What's the building height limit in Seaton?

Across Seaton, the average maximum building height is 6.0 m. Height is set per zone in the planning scheme (Victorian Planning Provisions) and can be varied by overlays and schedules. For the exact control on a specific address, generate a planning report.

Can I build a small second dwelling in Seaton?

Most lots in Seaton aren't eligible for a small second dwelling under the VPP small second dwelling provisions (Clause 52.18 / 54) — typically because the dominant zoning (RLZ) doesn't permit it, or lot sizes fall below the minimum. Always verify on the specific address.

What's the median rent in Seaton?

Median weekly rent for a house in Seaton is $450.

What planning constraints apply in Seaton?

Across Seaton, 32.9% bushfire-prone. These are suburb-wide percentages — every lot has its own combination. A planning report on a specific address shows exactly which controls apply.

What's the development potential of Seaton?

0 of 313 lots in Seaton show identifiable development potential — under-developed for the planning controls, eligible for a small second dwelling, or capable of subdivision. Average rezoning signal score: 11.0 / 100.

Get a planning report for any address in Seaton

Suburb-wide stats are useful for context. For a buy-or-walk decision on a specific lot, you need every control, every constraint, and every clause cited to source.

Run a report — from A$29

14-section report · planning scheme + overlays cross-referenced · cited to source

Methodology & sources

Zoning, height, overlays and development potential computed from the Wellingtonplanning scheme (Victorian Planning Provisions) and lot-level cadastre (313 lots). Hazard overlays, demographics and rent drawn from Victorian Planning Provisions & planning schemes, Victorian Building Authority / building permit activity, Victoria in Future, and ABS Census 2021. Aggregated by ZoneDSS · last updated 2026-06-08.

Suburb-wide statistics — your specific lot may vary. Always run a planning report on the actual address before making a decision. How ZoneDSS works →