Low Density Residential Zone dominant. Median sale $815K over the last 24 months. 2,089 lots resolved to zone, overlays and development potential.
Zoning
Belgrave is dominated by LDRZ — Low Density Residential Zone. Land use, building height, overlays, and permitted development are set per zone in the planning scheme under the Victorian Planning Provisions, with ResCode governing residential design.
Limit varies by lot — check your address for the exact figure.
Modelled dwelling capacity if every lot built to its zone controls.
Location
Belgrave 3160 covers 4.2 km² within Yarra Ranges.
Drill into any lot in Belgrave
Open the interactive map — click any address to see its zone, height, FSR, overlays, and approval likelihood.
Development potential
We score every lot for development signal — under-built relative to the controls, eligible for a small second dwelling, or sized for subdivision.
under the VPP small second dwelling provisions (Clause 52.18 / 54)
lots that may support subdivision
show at least one development signal
within a TOD corridor (uplift expected)
average uplift signal across the suburb
Own a property in Belgrave?
Check your lot's exact development potential — height, FSR, granny flat, subdivision, dual-occ.
Constraints & risks
a small share of lots (2.8%) intersect flood mapping; also: 100% of lots are bushfire-prone — a bushfire assessment is likely required; 3% of lots carry a Heritage Overlay.
Suburb-wide percentages — your specific lot may have all, some, or none of these.
LSIO / Floodway overlay
BMO — BAL assessment triggered
HO — controls on demolition & works
Near a recorded contaminated site
Market
Rent and market context from state rental bond and demographic data.
Demographics & lifestyle
ABS Census 2021 population data combined with lot-level amenity, healthcare, lifestyle, and crime indices.
Walkable amenity within 1 km
GP / hospital / pharmacy proximity
Cafés, parks, schools, transport
FAQs
Belgrave is dominated by the LDRZ (Low Density Residential Zone) zone, which covers 1,508 of 2,089 lots (72%). The full mix is: LDRZ Low Density Residential Zone (72%), GWAZ Green Wedge A Zone (9%), C1Z Commercial 1 Zone (5%), NRZ Neighbourhood Residential Zone (5%), PCRZ Public Conservation and Resource Zone (4%), TRZ Transport Zone (3%), PPRZ Public Park and Recreation Zone (2%), PUZ Public Use Zone (1%), C2Z Commercial 2 Zone (1%), RCZ Rural Conservation Zone (0%).
Across Belgrave, the average maximum building height is 7.0 m. Height is set per zone in the planning scheme (Victorian Planning Provisions) and can be varied by overlays and schedules. For the exact control on a specific address, generate a planning report.
Yes — 1,538 lots in Belgrave appear eligible for a small second dwelling under the VPP small second dwelling provisions (Clause 52.18 / 54), based on lot size, zoning, and frontage. Eligibility is lot-specific: get a planning report on your address to confirm.
The median sale price in Belgrave over the past 24 months is $815,000, across 0 sales.
Median weekly rent for a house in Belgrave is $605.
Across Belgrave, 2.8% flood-affected, 3% with heritage controls, 100.0% bushfire-prone. These are suburb-wide percentages — every lot has its own combination. A planning report on a specific address shows exactly which controls apply.
1,588 of 2,089 lots in Belgrave show identifiable development potential — under-developed for the planning controls, eligible for a small second dwelling, or capable of subdivision. 1,203 lots fall within a Transport Oriented Development corridor. Average rezoning signal score: 67.0 / 100.
Continue exploring
Compare zoning, development potential, and DA activity across other suburbs in Yarra Ranges and nearby postcodes.
Suburb-wide stats are useful for context. For a buy-or-walk decision on a specific lot, you need every control, every constraint, and every clause cited to source.
Run a report — from A$2914-section report · planning scheme + overlays cross-referenced · cited to source
Verify with official sources
Don't take our word for it. Every figure on this page is computed from authoritative Victoria Government data — and you can verify any of it directly with the source.
Official Victoria source — verify zoning, overlays, planning controls and the figures shown on this page.
Official Victoria source — verify zoning, overlays, planning controls and the figures shown on this page.
Official Victoria source — verify zoning, overlays, planning controls and the figures shown on this page.
Official Victoria source — verify zoning, overlays, planning controls and the figures shown on this page.
Zoning, height, overlays and development potential computed from the Yarra Rangesplanning scheme (Victorian Planning Provisions) and lot-level cadastre (2,089 lots). Hazard overlays, demographics and rent drawn from Victorian Planning Provisions & planning schemes, Victorian Building Authority / building permit activity, Victoria in Future, and ABS Census 2021. Aggregated by ZoneDSS · last updated 2026-06-08.
Suburb-wide statistics — your specific lot may vary. Always run a planning report on the actual address before making a decision. How ZoneDSS works →