Every planning control identified for any lot | Every planning rule & overlay cross-referenced in one query | Approval likelihood scored for every control | Conflicts and overrides resolved automatically | Every answer cited to the source clause | Ask planning questions in plain English | Results in under 1 second | Every planning control identified for any lot | Every planning rule & overlay cross-referenced in one query | Approval likelihood scored for every control | Conflicts and overrides resolved automatically | Every answer cited to the source clause | Ask planning questions in plain English | Results in under 1 second |
Suburb planning guide · Updated 2026-04-27

Gouldsville, NSW 2330 Zoning, development potential & planning controls

Primary Production dominant. 31 lots resolved to zone, overlays and development potential.

Dominant zone
RU1
Primary Production
Theoretical dwellings
modelled capacity
granny flat eligible
0
lots
Total lots
31
Marketplace

Need a builder, surveyor or planner near Gouldsville? See local experts ↓

Zoning

What you can build in Gouldsville

Gouldsville is dominated by RU1Primary Production. Land use rules, height, FSR, and permitted developments are set per zone in the Local Environmental Plan and refined by the Development Control Plan.

RU1
Dominant
RU1 Primary Production 100.0%
Avg max height
m

Limit varies by lot — check your address for the exact figure.

Avg max FSR
:1

Floor Space Ratio — total floor area as a multiple of lot area.

Use mix
Rural100%

Location

Where Gouldsville sits

Gouldsville 2330 covers an undefined area within Singleton Council.

Overlays © NSW Government
Council
Singleton Council
Postcode
2330
Area
Total lots
31

Drill into any lot in Gouldsville

Open the interactive map — click any address to see its zone, height, FSR, overlays, and approval likelihood.

Open interactive map

Development potential

Where the upside is in Gouldsville

We score every lot for development signal — under-built relative to the controls, eligible for a granny flat, or sized for subdivision.

granny flat eligible
0

under SEPP (Housing) 2021

Subdivision potential
29

lots that may support subdivision

Total dev potential
0 lots

show at least one development signal

Rezoning signal score
1.1 /100

average uplift signal across the suburb

0

Own a property in Gouldsville?

Check your lot's exact development potential — height, FSR, granny flat, subdivision, dual-occ.

Run a report on your address

Constraints & risks

What could stop you in Gouldsville

100% of lots are bushfire-prone — a bushfire assessment is likely required; also: 3.2% of lots are within 100m of a recorded contaminated site; 22.6% of lots intersect a Threatened Ecological Community.

Suburb-wide percentages — your specific lot may have all, some, or none of these.

Flood-affected None

Mapped flood-prone land

Bushfire-prone 100.0%

RFS bushfire-prone land mapping

Heritage controls None

Heritage item or Conservation Area

Near contaminated land 3.2%

Within 100 m of EPA-listed site

Threatened ecology (TEC) 22.6%

Mapped TEC vegetation

Sea-level rise exposure None

Coastal hazard mapping

Flight noise contour None

ANEF / aircraft noise

Market

Gouldsville property market

Sales, rent, and yield data drawn from NSW Property Sales Information and rental bond data over the past 24 months.

Median rent (house)
/ wk
Houses

ZoneDSS Marketplace

Local experts in Gouldsville

0 businesses serving Gouldsville and nearby.

We're adding local businesses in Gouldsville. Run a business here? List yours free →

Run a local business? Get found by property owners researching Gouldsville.

List your business — free

FAQs

Common questions about Gouldsville

What's the zoning in Gouldsville 2330?

Gouldsville is dominated by the RU1 (Primary Production) zone, which covers 31 of 31 lots (100%). The full mix is: RU1 Primary Production (100%).

Can I build a granny flat in Gouldsville?

Most lots in Gouldsville aren't eligible for a granny flat under SEPP (Housing) 2021 — typically because the dominant zoning (RU1) doesn't permit it, or lot sizes fall below the minimum. Always verify on the specific address.

What planning constraints apply in Gouldsville?

Across Gouldsville, 100.0% bushfire-prone, 3.2% near contaminated sites. These are suburb-wide percentages — every lot has its own combination. A planning report on a specific address shows exactly which controls apply.

What's the development potential of Gouldsville?

0 of 31 lots in Gouldsville show identifiable development potential — under-developed for the planning controls, eligible for a granny flat, or capable of subdivision. Average rezoning signal score: 1.1 / 100.

Get a planning report for any address in Gouldsville

Suburb-wide stats are useful for context. For a buy-or-walk decision on a specific lot, you need every control, every constraint, and every clause cited to source.

Run a report — from A$29

14-section report · LEP + SEPP + DCP cross-referenced · cited to source

Methodology & sources

Zoning, height, FSR, and overlays parsed from the Singleton Council Local Environmental Plan, applicable State Environmental Planning Policies, and the Development Control Plan. Property sales drawn from NSW Property Sales Information. DA history aggregated from the NSW Planning Portal. Heritage, flood, bushfire, contaminated land, TEC, sea-level rise, and aircraft noise overlays from the NSW Spatial Services and EPA registers. Population, age, income, and tenure from ABS Census 2021. Aggregated by ZoneDSS · last updated 2026-04-27.

Suburb-wide statistics — your specific lot may vary. Always run a planning report on the actual address before making a decision. How ZoneDSS works →