Low Density Residential dominant. Median sale $940K over the last 24 months. 87% of decided DAs approved.
Need a builder, surveyor or planner near Mount Saint Thomas? See local experts ↓
Zoning
Mount Saint Thomas is dominated by R2 — Low Density Residential. Land use rules, height, FSR, and permitted developments are set per zone in the Local Environmental Plan and refined by the Development Control Plan.
Limit varies by lot — check your address for the exact figure.
Floor Space Ratio — total floor area as a multiple of lot area.
Location
Mount Saint Thomas 2500 covers an undefined area within Wollongong City Council.
Drill into any lot in Mount Saint Thomas
Open the interactive map — click any address to see its zone, height, FSR, overlays, and approval likelihood.
Development potential
We score every lot for development signal — under-built relative to the controls, eligible for a granny flat, or sized for subdivision.
lots with remaining GFA capacity
under SEPP (Housing) 2021
lots that may support subdivision
show at least one development signal
average uplift signal across the suburb
Theoretical capacity if every lot built to its limit: 2,501 dwellings, with 166,891 m² of unused GFA across the suburb.
Own a property in Mount Saint Thomas?
Check your lot's exact development potential — height, FSR, granny flat, subdivision, dual-occ.
Constraints & risks
10% of lots are bushfire-prone — a bushfire assessment is likely required; also: 0% of lots carry heritage controls; 1.4% of lots intersect a Threatened Ecological Community.
Suburb-wide percentages — your specific lot may have all, some, or none of these.
Mapped flood-prone land
RFS bushfire-prone land mapping
Heritage item or Conservation Area
Within 100 m of EPA-listed site
Mapped TEC vegetation
Coastal hazard mapping
ANEF / aircraft noise
Market
Sales, rent, and yield data drawn from NSW Property Sales Information and rental bond data over the past 24 months.
DA activity
23 development applications for Mount Saint Thomas addresses were decided by Wollongong City Council over the past 24 months. 20 approved — a 87% approval rate.
Demographics & lifestyle
ABS Census 2021 population data combined with lot-level amenity, healthcare, lifestyle, and crime indices.
Walkable amenity within 1 km
GP / hospital / pharmacy proximity
Cafés, parks, schools, transport
ZoneDSS Marketplace
0 businesses serving Mount Saint Thomas and nearby.
We're adding local businesses in Mount Saint Thomas. Run a business here? List yours free →
Run a local business? Get found by property owners researching Mount Saint Thomas.
List your business — freeFAQs
Mount Saint Thomas is dominated by the R2 (Low Density Residential) zone, which covers 584 of 591 lots (99%). The full mix is: R2 Low Density Residential (99%), SP2 Infrastructure (1%), R3 Medium Density Residential (0%), E1 Local Centre (0%), C3 Commercial Core (0%).
Across Mount Saint Thomas, the average maximum building height is 9.0 m and the average maximum Floor Space Ratio (FSR) is 0.50:1. Individual lots can vary materially — height and FSR are set per zone in the Local Environmental Plan (LEP) and can be modified by overlays. For an exact figure on a specific address, generate a planning report.
Yes — 548 lots in Mount Saint Thomas appear eligible for a granny flat under SEPP (Housing) 2021, based on lot size, zoning, and frontage. Eligibility is lot-specific: get a planning report on your address to confirm.
The median sale price in Mount Saint Thomas over the past 24 months is $940,000, across 34 sales. Median unimproved land value is $559,000.
Median weekly rent for a house in Mount Saint Thomas is $650. Gross rental yield works out to 3.9%.
Wollongong City Council decided 23 development applications for Mount Saint Thomas addresses over the past 24 months, with 20 approved (87% approval rate). Processing time depends heavily on application complexity, council backlog, and whether the application requires referral to other agencies.
Across Mount Saint Thomas, 0% with heritage controls, 9.8% bushfire-prone. These are suburb-wide percentages — every lot has its own combination. A planning report on a specific address shows exactly which controls apply.
585 of 591 lots in Mount Saint Thomas show identifiable development potential — under-developed for the planning controls, eligible for a granny flat, or capable of subdivision. Average rezoning signal score: 39.0 / 100.
Continue exploring
Compare zoning, development potential, and DA activity across other suburbs in Wollongong City Council and nearby postcodes.
Suburb-wide stats are useful for context. For a buy-or-walk decision on a specific lot, you need every control, every constraint, and every clause cited to source.
Run a report — from A$2914-section report · LEP + SEPP + DCP cross-referenced · cited to source
Verify with official sources
Don't take our word for it. Every figure on this page is computed from authoritative New South Wales Government data — and you can verify any of it directly with the source.
Official zoning, height, FSR, and overlay maps for any NSW address. The primary source for everything on this page.
planningportal.nsw.gov.au
Cadastral lot boundaries, aerial imagery, easements, and environmental overlays from NSW Spatial Services.
maps.six.nsw.gov.au
State-listed heritage items and Heritage Conservation Areas. Search by suburb to see what's listed in Mount Saint Thomas.
hms.heritage.nsw.gov.au
Sites notified to the EPA under the Contaminated Land Management Act. Critical for due diligence on any address.
apps.epa.nsw.gov.au
Rural Fire Service map of bushfire-prone land categories. Triggers BAL assessment requirements for new builds.
rfs.nsw.gov.au
Australian Bureau of Statistics QuickStats for postcode 2500 — population, age, household composition, income, tenure.
abs.gov.au
Zoning, height, FSR, and overlays parsed from the Wollongong City Council Local Environmental Plan, applicable State Environmental Planning Policies, and the Development Control Plan. Property sales drawn from NSW Property Sales Information. DA history aggregated from the NSW Planning Portal. Heritage, flood, bushfire, contaminated land, TEC, sea-level rise, and aircraft noise overlays from the NSW Spatial Services and EPA registers. Population, age, income, and tenure from ABS Census 2021. Aggregated by ZoneDSS · last updated 2026-04-27.
Suburb-wide statistics — your specific lot may vary. Always run a planning report on the actual address before making a decision. How ZoneDSS works →